[−][src]Struct futures::sync::mpsc::UnboundedSender
The transmission end of a channel which is used to send values.
This is created by the unbounded method.
Methods
impl<T> UnboundedSender<T>[src]
impl<T> UnboundedSender<T>pub fn is_closed(&self) -> bool[src]
pub fn is_closed(&self) -> boolReturns whether this channel is closed without needing a context.
pub fn unbounded_send(&self, msg: T) -> Result<(), SendError<T>>[src]
pub fn unbounded_send(&self, msg: T) -> Result<(), SendError<T>>Sends the provided message along this channel.
This is an unbounded sender, so this function differs from Sink::send
by ensuring the return type reflects that the channel is always ready to
receive messages.
Trait Implementations
impl<T> Sink for UnboundedSender<T>[src]
impl<T> Sink for UnboundedSender<T>type SinkItem = T
The type of value that the sink accepts.
type SinkError = SendError<T>
The type of value produced by the sink when an error occurs.
fn start_send(&mut self, msg: T) -> StartSend<T, SendError<T>>[src]
fn start_send(&mut self, msg: T) -> StartSend<T, SendError<T>>Begin the process of sending a value to the sink. Read more
fn poll_complete(&mut self) -> Poll<(), SendError<T>>[src]
fn poll_complete(&mut self) -> Poll<(), SendError<T>>Flush all output from this sink, if necessary. Read more
fn close(&mut self) -> Poll<(), SendError<T>>[src]
fn close(&mut self) -> Poll<(), SendError<T>>A method to indicate that no more values will ever be pushed into this sink. Read more
fn wait(self) -> Wait<Self> where
Self: Sized, [src]
fn wait(self) -> Wait<Self> where
Self: Sized, Creates a new object which will produce a synchronous sink. Read more
fn with<U, F, Fut>(self, f: F) -> With<Self, U, F, Fut> where
F: FnMut(U) -> Fut,
Fut: IntoFuture<Item = Self::SinkItem>,
Fut::Error: From<Self::SinkError>,
Self: Sized, [src]
fn with<U, F, Fut>(self, f: F) -> With<Self, U, F, Fut> where
F: FnMut(U) -> Fut,
Fut: IntoFuture<Item = Self::SinkItem>,
Fut::Error: From<Self::SinkError>,
Self: Sized, Composes a function in front of the sink. Read more
fn with_flat_map<U, F, St>(self, f: F) -> WithFlatMap<Self, U, F, St> where
F: FnMut(U) -> St,
St: Stream<Item = Self::SinkItem, Error = Self::SinkError>,
Self: Sized, [src]
fn with_flat_map<U, F, St>(self, f: F) -> WithFlatMap<Self, U, F, St> where
F: FnMut(U) -> St,
St: Stream<Item = Self::SinkItem, Error = Self::SinkError>,
Self: Sized, Composes a function in front of the sink. Read more
fn sink_map_err<F, E>(self, f: F) -> SinkMapErr<Self, F> where
F: FnOnce(Self::SinkError) -> E,
Self: Sized, [src]
fn sink_map_err<F, E>(self, f: F) -> SinkMapErr<Self, F> where
F: FnOnce(Self::SinkError) -> E,
Self: Sized, Transforms the error returned by the sink.
fn sink_from_err<E: From<Self::SinkError>>(self) -> SinkFromErr<Self, E> where
Self: Sized, [src]
fn sink_from_err<E: From<Self::SinkError>>(self) -> SinkFromErr<Self, E> where
Self: Sized, Map this sink's error to any error implementing From for this sink's Error, returning a new sink. Read more
fn buffer(self, amt: usize) -> Buffer<Self> where
Self: Sized, [src]
fn buffer(self, amt: usize) -> Buffer<Self> where
Self: Sized, Adds a fixed-size buffer to the current sink. Read more
fn fanout<S>(self, other: S) -> Fanout<Self, S> where
Self: Sized,
Self::SinkItem: Clone,
S: Sink<SinkItem = Self::SinkItem, SinkError = Self::SinkError>, [src]
fn fanout<S>(self, other: S) -> Fanout<Self, S> where
Self: Sized,
Self::SinkItem: Clone,
S: Sink<SinkItem = Self::SinkItem, SinkError = Self::SinkError>, Fanout items to multiple sinks. Read more
fn flush(self) -> Flush<Self> where
Self: Sized, [src]
fn flush(self) -> Flush<Self> where
Self: Sized, A future that completes when the sink has finished processing all pending requests. Read more
fn send(self, item: Self::SinkItem) -> Send<Self> where
Self: Sized, [src]
fn send(self, item: Self::SinkItem) -> Send<Self> where
Self: Sized, A future that completes after the given item has been fully processed into the sink, including flushing. Read more
fn send_all<S>(self, stream: S) -> SendAll<Self, S> where
S: Stream<Item = Self::SinkItem>,
Self::SinkError: From<S::Error>,
Self: Sized, [src]
fn send_all<S>(self, stream: S) -> SendAll<Self, S> where
S: Stream<Item = Self::SinkItem>,
Self::SinkError: From<S::Error>,
Self: Sized, A future that completes after the given stream has been fully processed into the sink, including flushing. Read more
impl<'a, T> Sink for &'a UnboundedSender<T>[src]
impl<'a, T> Sink for &'a UnboundedSender<T>type SinkItem = T
The type of value that the sink accepts.
type SinkError = SendError<T>
The type of value produced by the sink when an error occurs.
fn start_send(&mut self, msg: T) -> StartSend<T, SendError<T>>[src]
fn start_send(&mut self, msg: T) -> StartSend<T, SendError<T>>Begin the process of sending a value to the sink. Read more
fn poll_complete(&mut self) -> Poll<(), SendError<T>>[src]
fn poll_complete(&mut self) -> Poll<(), SendError<T>>Flush all output from this sink, if necessary. Read more
fn close(&mut self) -> Poll<(), SendError<T>>[src]
fn close(&mut self) -> Poll<(), SendError<T>>A method to indicate that no more values will ever be pushed into this sink. Read more
fn wait(self) -> Wait<Self> where
Self: Sized, [src]
fn wait(self) -> Wait<Self> where
Self: Sized, Creates a new object which will produce a synchronous sink. Read more
fn with<U, F, Fut>(self, f: F) -> With<Self, U, F, Fut> where
F: FnMut(U) -> Fut,
Fut: IntoFuture<Item = Self::SinkItem>,
Fut::Error: From<Self::SinkError>,
Self: Sized, [src]
fn with<U, F, Fut>(self, f: F) -> With<Self, U, F, Fut> where
F: FnMut(U) -> Fut,
Fut: IntoFuture<Item = Self::SinkItem>,
Fut::Error: From<Self::SinkError>,
Self: Sized, Composes a function in front of the sink. Read more
fn with_flat_map<U, F, St>(self, f: F) -> WithFlatMap<Self, U, F, St> where
F: FnMut(U) -> St,
St: Stream<Item = Self::SinkItem, Error = Self::SinkError>,
Self: Sized, [src]
fn with_flat_map<U, F, St>(self, f: F) -> WithFlatMap<Self, U, F, St> where
F: FnMut(U) -> St,
St: Stream<Item = Self::SinkItem, Error = Self::SinkError>,
Self: Sized, Composes a function in front of the sink. Read more
fn sink_map_err<F, E>(self, f: F) -> SinkMapErr<Self, F> where
F: FnOnce(Self::SinkError) -> E,
Self: Sized, [src]
fn sink_map_err<F, E>(self, f: F) -> SinkMapErr<Self, F> where
F: FnOnce(Self::SinkError) -> E,
Self: Sized, Transforms the error returned by the sink.
fn sink_from_err<E: From<Self::SinkError>>(self) -> SinkFromErr<Self, E> where
Self: Sized, [src]
fn sink_from_err<E: From<Self::SinkError>>(self) -> SinkFromErr<Self, E> where
Self: Sized, Map this sink's error to any error implementing From for this sink's Error, returning a new sink. Read more
fn buffer(self, amt: usize) -> Buffer<Self> where
Self: Sized, [src]
fn buffer(self, amt: usize) -> Buffer<Self> where
Self: Sized, Adds a fixed-size buffer to the current sink. Read more
fn fanout<S>(self, other: S) -> Fanout<Self, S> where
Self: Sized,
Self::SinkItem: Clone,
S: Sink<SinkItem = Self::SinkItem, SinkError = Self::SinkError>, [src]
fn fanout<S>(self, other: S) -> Fanout<Self, S> where
Self: Sized,
Self::SinkItem: Clone,
S: Sink<SinkItem = Self::SinkItem, SinkError = Self::SinkError>, Fanout items to multiple sinks. Read more
fn flush(self) -> Flush<Self> where
Self: Sized, [src]
fn flush(self) -> Flush<Self> where
Self: Sized, A future that completes when the sink has finished processing all pending requests. Read more
fn send(self, item: Self::SinkItem) -> Send<Self> where
Self: Sized, [src]
fn send(self, item: Self::SinkItem) -> Send<Self> where
Self: Sized, A future that completes after the given item has been fully processed into the sink, including flushing. Read more
fn send_all<S>(self, stream: S) -> SendAll<Self, S> where
S: Stream<Item = Self::SinkItem>,
Self::SinkError: From<S::Error>,
Self: Sized, [src]
fn send_all<S>(self, stream: S) -> SendAll<Self, S> where
S: Stream<Item = Self::SinkItem>,
Self::SinkError: From<S::Error>,
Self: Sized, A future that completes after the given stream has been fully processed into the sink, including flushing. Read more
impl<T> Clone for UnboundedSender<T>[src]
impl<T> Clone for UnboundedSender<T>fn clone(&self) -> UnboundedSender<T>[src]
fn clone(&self) -> UnboundedSender<T>Returns a copy of the value. Read more
fn clone_from(&mut self, source: &Self)1.0.0[src]
fn clone_from(&mut self, source: &Self)Performs copy-assignment from source. Read more
impl<T: Debug> Debug for UnboundedSender<T>[src]
impl<T: Debug> Debug for UnboundedSender<T>Auto Trait Implementations
impl<T> Send for UnboundedSender<T> where
T: Send,
impl<T> Send for UnboundedSender<T> where
T: Send, impl<T> Sync for UnboundedSender<T> where
T: Send,
impl<T> Sync for UnboundedSender<T> where
T: Send, Blanket Implementations
impl<T> From for T[src]
impl<T> From for Timpl<T, U> TryFrom for T where
T: From<U>, [src]
impl<T, U> TryFrom for T where
T: From<U>, type Error = !
try_from)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>try_from)Performs the conversion.
impl<T, U> TryInto for T where
U: TryFrom<T>, [src]
impl<T, U> TryInto for T where
U: TryFrom<T>, type Error = <U as TryFrom<T>>::Error
try_from)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>try_from)Performs the conversion.
impl<T, U> Into for T where
U: From<T>, [src]
impl<T, U> Into for T where
U: From<T>, impl<T> Borrow for T where
T: ?Sized, [src]
impl<T> Borrow for T where
T: ?Sized, impl<T> BorrowMut for T where
T: ?Sized, [src]
impl<T> BorrowMut for T where
T: ?Sized, fn borrow_mut(&mut self) -> &mut T[src]
fn borrow_mut(&mut self) -> &mut TMutably borrows from an owned value. Read more
impl<T> Any for T where
T: 'static + ?Sized, [src]
impl<T> Any for T where
T: 'static + ?Sized, fn get_type_id(&self) -> TypeId[src]
fn get_type_id(&self) -> TypeId🔬 This is a nightly-only experimental API. (get_type_id)
this method will likely be replaced by an associated static
Gets the TypeId of self. Read more
impl<T> ToOwned for T where
T: Clone, [src]
impl<T> ToOwned for T where
T: Clone, type Owned = T
fn to_owned(&self) -> T[src]
fn to_owned(&self) -> TCreates owned data from borrowed data, usually by cloning. Read more
fn clone_into(&self, target: &mut T)[src]
fn clone_into(&self, target: &mut T)🔬 This is a nightly-only experimental API. (toowned_clone_into)
recently added
Uses borrowed data to replace owned data, usually by cloning. Read more