[−][src]Struct hyper::net::HttpStream
A wrapper around a TcpStream.
Trait Implementations
impl NetworkStream for HttpStream[src]
impl NetworkStream for HttpStreamfn peer_addr(&mut self) -> Result<SocketAddr>[src]
fn peer_addr(&mut self) -> Result<SocketAddr>Get the remote address of the underlying connection.
fn set_read_timeout(&self, dur: Option<Duration>) -> Result<()>[src]
fn set_read_timeout(&self, dur: Option<Duration>) -> Result<()>Set the maximum time to wait for a read to complete.
fn set_write_timeout(&self, dur: Option<Duration>) -> Result<()>[src]
fn set_write_timeout(&self, dur: Option<Duration>) -> Result<()>Set the maximum time to wait for a write to complete.
fn close(&mut self, how: Shutdown) -> Result<()>[src]
fn close(&mut self, how: Shutdown) -> Result<()>This will be called when Stream should no longer be kept alive.
impl Clone for HttpStream[src]
impl Clone for HttpStreamⓘImportant traits for HttpStreamfn clone(&self) -> HttpStream[src]
fn clone(&self) -> HttpStreamReturns a copy of the value. Read more
fn clone_from(&mut self, source: &Self)1.0.0[src]
fn clone_from(&mut self, source: &Self)Performs copy-assignment from source. Read more
impl Debug for HttpStream[src]
impl Debug for HttpStreamfn fmt(&self, f: &mut Formatter) -> Result[src]
fn fmt(&self, f: &mut Formatter) -> ResultFormats the value using the given formatter. Read more
impl Write for HttpStream[src]
impl Write for HttpStreamfn write(&mut self, msg: &[u8]) -> Result<usize>[src]
fn write(&mut self, msg: &[u8]) -> Result<usize>Write a buffer into this object, returning how many bytes were written. Read more
fn flush(&mut self) -> Result<()>[src]
fn flush(&mut self) -> Result<()>Flush this output stream, ensuring that all intermediately buffered contents reach their destination. Read more
fn write_all(&mut self, buf: &[u8]) -> Result<(), Error>1.0.0[src]
fn write_all(&mut self, buf: &[u8]) -> Result<(), Error>Attempts to write an entire buffer into this write. Read more
fn write_fmt(&mut self, fmt: Arguments) -> Result<(), Error>1.0.0[src]
fn write_fmt(&mut self, fmt: Arguments) -> Result<(), Error>Writes a formatted string into this writer, returning any error encountered. Read more
fn by_ref(&mut self) -> &mut Self1.0.0[src]
fn by_ref(&mut self) -> &mut SelfCreates a "by reference" adaptor for this instance of Write. Read more
impl Read for HttpStream[src]
impl Read for HttpStreamfn read(&mut self, buf: &mut [u8]) -> Result<usize>[src]
fn read(&mut self, buf: &mut [u8]) -> Result<usize>Pull some bytes from this source into the specified buffer, returning how many bytes were read. Read more
unsafe fn initializer(&self) -> Initializer[src]
unsafe fn initializer(&self) -> Initializerread_initializer)Determines if this Reader can work with buffers of uninitialized memory. Read more
fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize, Error>1.0.0[src]
fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize, Error>Read all bytes until EOF in this source, placing them into buf. Read more
fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>1.0.0[src]
fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>Read all bytes until EOF in this source, appending them to buf. Read more
fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>1.6.0[src]
fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>Read the exact number of bytes required to fill buf. Read more
fn by_ref(&mut self) -> &mut Self1.0.0[src]
fn by_ref(&mut self) -> &mut SelfCreates a "by reference" adaptor for this instance of Read. Read more
fn bytes(self) -> Bytes<Self>1.0.0[src]
fn bytes(self) -> Bytes<Self>Transforms this Read instance to an [Iterator] over its bytes. Read more
fn chain<R>(self, next: R) -> Chain<Self, R> where
R: Read, 1.0.0[src]
fn chain<R>(self, next: R) -> Chain<Self, R> where
R: Read, Creates an adaptor which will chain this stream with another. Read more
fn take(self, limit: u64) -> Take<Self>1.0.0[src]
fn take(self, limit: u64) -> Take<Self>Creates an adaptor which will read at most limit bytes from it. Read more
impl FromRawFd for HttpStream[src]
impl FromRawFd for HttpStreamⓘImportant traits for HttpStreamunsafe fn from_raw_fd(fd: RawFd) -> HttpStream[src]
unsafe fn from_raw_fd(fd: RawFd) -> HttpStreamConstructs a new instance of Self from the given raw file descriptor. Read more
impl AsRawFd for HttpStream[src]
impl AsRawFd for HttpStreamAuto Trait Implementations
impl Send for HttpStream
impl Send for HttpStreamimpl Sync for HttpStream
impl Sync for HttpStreamBlanket Implementations
impl<T, U> Into for T where
U: From<T>, [src]
impl<T, U> Into for T where
U: From<T>, impl<T> ToOwned for T where
T: Clone, [src]
impl<T> ToOwned for T where
T: Clone, type Owned = T
fn to_owned(&self) -> T[src]
fn to_owned(&self) -> TCreates owned data from borrowed data, usually by cloning. Read more
fn clone_into(&self, target: &mut T)[src]
fn clone_into(&self, target: &mut T)🔬 This is a nightly-only experimental API. (toowned_clone_into)
recently added
Uses borrowed data to replace owned data, usually by cloning. Read more
impl<T> From for T[src]
impl<T> From for Timpl<T, U> TryFrom for T where
T: From<U>, [src]
impl<T, U> TryFrom for T where
T: From<U>, type Error = !
try_from)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>try_from)Performs the conversion.
impl<T> Borrow for T where
T: ?Sized, [src]
impl<T> Borrow for T where
T: ?Sized, impl<T> BorrowMut for T where
T: ?Sized, [src]
impl<T> BorrowMut for T where
T: ?Sized, fn borrow_mut(&mut self) -> &mut T[src]
fn borrow_mut(&mut self) -> &mut TMutably borrows from an owned value. Read more
impl<T, U> TryInto for T where
U: TryFrom<T>, [src]
impl<T, U> TryInto for T where
U: TryFrom<T>, type Error = <U as TryFrom<T>>::Error
try_from)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>try_from)Performs the conversion.
impl<T> Any for T where
T: 'static + ?Sized, [src]
impl<T> Any for T where
T: 'static + ?Sized, fn get_type_id(&self) -> TypeId[src]
fn get_type_id(&self) -> TypeId🔬 This is a nightly-only experimental API. (get_type_id)
this method will likely be replaced by an associated static
Gets the TypeId of self. Read more
impl<R> ReadBytesExt for R where
R: Read + ?Sized, [src]
impl<R> ReadBytesExt for R where
R: Read + ?Sized, fn read_u8(&mut self) -> Result<u8, Error>[src]
fn read_u8(&mut self) -> Result<u8, Error>Reads an unsigned 8 bit integer from the underlying reader. Read more
fn read_i8(&mut self) -> Result<i8, Error>[src]
fn read_i8(&mut self) -> Result<i8, Error>Reads a signed 8 bit integer from the underlying reader. Read more
fn read_u16<T>(&mut self) -> Result<u16, Error> where
T: ByteOrder, [src]
fn read_u16<T>(&mut self) -> Result<u16, Error> where
T: ByteOrder, Reads an unsigned 16 bit integer from the underlying reader. Read more
fn read_i16<T>(&mut self) -> Result<i16, Error> where
T: ByteOrder, [src]
fn read_i16<T>(&mut self) -> Result<i16, Error> where
T: ByteOrder, Reads a signed 16 bit integer from the underlying reader. Read more
fn read_u24<T>(&mut self) -> Result<u32, Error> where
T: ByteOrder, [src]
fn read_u24<T>(&mut self) -> Result<u32, Error> where
T: ByteOrder, Reads an unsigned 24 bit integer from the underlying reader. Read more
fn read_i24<T>(&mut self) -> Result<i32, Error> where
T: ByteOrder, [src]
fn read_i24<T>(&mut self) -> Result<i32, Error> where
T: ByteOrder, Reads a signed 24 bit integer from the underlying reader. Read more
fn read_u32<T>(&mut self) -> Result<u32, Error> where
T: ByteOrder, [src]
fn read_u32<T>(&mut self) -> Result<u32, Error> where
T: ByteOrder, Reads an unsigned 32 bit integer from the underlying reader. Read more
fn read_i32<T>(&mut self) -> Result<i32, Error> where
T: ByteOrder, [src]
fn read_i32<T>(&mut self) -> Result<i32, Error> where
T: ByteOrder, Reads a signed 32 bit integer from the underlying reader. Read more
fn read_u48<T>(&mut self) -> Result<u64, Error> where
T: ByteOrder, [src]
fn read_u48<T>(&mut self) -> Result<u64, Error> where
T: ByteOrder, Reads an unsigned 48 bit integer from the underlying reader. Read more
fn read_i48<T>(&mut self) -> Result<i64, Error> where
T: ByteOrder, [src]
fn read_i48<T>(&mut self) -> Result<i64, Error> where
T: ByteOrder, Reads a signed 48 bit integer from the underlying reader. Read more
fn read_u64<T>(&mut self) -> Result<u64, Error> where
T: ByteOrder, [src]
fn read_u64<T>(&mut self) -> Result<u64, Error> where
T: ByteOrder, Reads an unsigned 64 bit integer from the underlying reader. Read more
fn read_i64<T>(&mut self) -> Result<i64, Error> where
T: ByteOrder, [src]
fn read_i64<T>(&mut self) -> Result<i64, Error> where
T: ByteOrder, Reads a signed 64 bit integer from the underlying reader. Read more
fn read_uint<T>(&mut self, nbytes: usize) -> Result<u64, Error> where
T: ByteOrder, [src]
fn read_uint<T>(&mut self, nbytes: usize) -> Result<u64, Error> where
T: ByteOrder, Reads an unsigned n-bytes integer from the underlying reader. Read more
fn read_int<T>(&mut self, nbytes: usize) -> Result<i64, Error> where
T: ByteOrder, [src]
fn read_int<T>(&mut self, nbytes: usize) -> Result<i64, Error> where
T: ByteOrder, Reads a signed n-bytes integer from the underlying reader. Read more
fn read_f32<T>(&mut self) -> Result<f32, Error> where
T: ByteOrder, [src]
fn read_f32<T>(&mut self) -> Result<f32, Error> where
T: ByteOrder, Reads a IEEE754 single-precision (4 bytes) floating point number from the underlying reader. Read more
fn read_f64<T>(&mut self) -> Result<f64, Error> where
T: ByteOrder, [src]
fn read_f64<T>(&mut self) -> Result<f64, Error> where
T: ByteOrder, Reads a IEEE754 double-precision (8 bytes) floating point number from the underlying reader. Read more
fn read_u16_into<T>(&mut self, dst: &mut [u16]) -> Result<(), Error> where
T: ByteOrder, [src]
fn read_u16_into<T>(&mut self, dst: &mut [u16]) -> Result<(), Error> where
T: ByteOrder, Reads a sequence of unsigned 16 bit integers from the underlying reader. Read more
fn read_u32_into<T>(&mut self, dst: &mut [u32]) -> Result<(), Error> where
T: ByteOrder, [src]
fn read_u32_into<T>(&mut self, dst: &mut [u32]) -> Result<(), Error> where
T: ByteOrder, Reads a sequence of unsigned 32 bit integers from the underlying reader. Read more
fn read_u64_into<T>(&mut self, dst: &mut [u64]) -> Result<(), Error> where
T: ByteOrder, [src]
fn read_u64_into<T>(&mut self, dst: &mut [u64]) -> Result<(), Error> where
T: ByteOrder, Reads a sequence of unsigned 64 bit integers from the underlying reader. Read more
fn read_i16_into<T>(&mut self, dst: &mut [i16]) -> Result<(), Error> where
T: ByteOrder, [src]
fn read_i16_into<T>(&mut self, dst: &mut [i16]) -> Result<(), Error> where
T: ByteOrder, Reads a sequence of signed 16 bit integers from the underlying reader. Read more
fn read_i32_into<T>(&mut self, dst: &mut [i32]) -> Result<(), Error> where
T: ByteOrder, [src]
fn read_i32_into<T>(&mut self, dst: &mut [i32]) -> Result<(), Error> where
T: ByteOrder, Reads a sequence of signed 32 bit integers from the underlying reader. Read more
fn read_i64_into<T>(&mut self, dst: &mut [i64]) -> Result<(), Error> where
T: ByteOrder, [src]
fn read_i64_into<T>(&mut self, dst: &mut [i64]) -> Result<(), Error> where
T: ByteOrder, Reads a sequence of signed 64 bit integers from the underlying reader. Read more
fn read_f32_into<T>(&mut self, dst: &mut [f32]) -> Result<(), Error> where
T: ByteOrder, [src]
fn read_f32_into<T>(&mut self, dst: &mut [f32]) -> Result<(), Error> where
T: ByteOrder, Reads a sequence of IEEE754 single-precision (4 bytes) floating point numbers from the underlying reader. Read more
fn read_f32_into_unchecked<T>(&mut self, dst: &mut [f32]) -> Result<(), Error> where
T: ByteOrder, [src]
fn read_f32_into_unchecked<T>(&mut self, dst: &mut [f32]) -> Result<(), Error> where
T: ByteOrder, : please use read_f32_into instead
DEPRECATED. Read more
fn read_f64_into<T>(&mut self, dst: &mut [f64]) -> Result<(), Error> where
T: ByteOrder, [src]
fn read_f64_into<T>(&mut self, dst: &mut [f64]) -> Result<(), Error> where
T: ByteOrder, Reads a sequence of IEEE754 double-precision (8 bytes) floating point numbers from the underlying reader. Read more
fn read_f64_into_unchecked<T>(&mut self, dst: &mut [f64]) -> Result<(), Error> where
T: ByteOrder, [src]
fn read_f64_into_unchecked<T>(&mut self, dst: &mut [f64]) -> Result<(), Error> where
T: ByteOrder, : please use read_f64_into instead
DEPRECATED. Read more
impl<W> WriteBytesExt for W where
W: Write + ?Sized, [src]
impl<W> WriteBytesExt for W where
W: Write + ?Sized, fn write_u8(&mut self, n: u8) -> Result<(), Error>[src]
fn write_u8(&mut self, n: u8) -> Result<(), Error>Writes an unsigned 8 bit integer to the underlying writer. Read more
fn write_i8(&mut self, n: i8) -> Result<(), Error>[src]
fn write_i8(&mut self, n: i8) -> Result<(), Error>Writes a signed 8 bit integer to the underlying writer. Read more
fn write_u16<T>(&mut self, n: u16) -> Result<(), Error> where
T: ByteOrder, [src]
fn write_u16<T>(&mut self, n: u16) -> Result<(), Error> where
T: ByteOrder, Writes an unsigned 16 bit integer to the underlying writer. Read more
fn write_i16<T>(&mut self, n: i16) -> Result<(), Error> where
T: ByteOrder, [src]
fn write_i16<T>(&mut self, n: i16) -> Result<(), Error> where
T: ByteOrder, Writes a signed 16 bit integer to the underlying writer. Read more
fn write_u24<T>(&mut self, n: u32) -> Result<(), Error> where
T: ByteOrder, [src]
fn write_u24<T>(&mut self, n: u32) -> Result<(), Error> where
T: ByteOrder, Writes an unsigned 24 bit integer to the underlying writer. Read more
fn write_i24<T>(&mut self, n: i32) -> Result<(), Error> where
T: ByteOrder, [src]
fn write_i24<T>(&mut self, n: i32) -> Result<(), Error> where
T: ByteOrder, Writes a signed 24 bit integer to the underlying writer. Read more
fn write_u32<T>(&mut self, n: u32) -> Result<(), Error> where
T: ByteOrder, [src]
fn write_u32<T>(&mut self, n: u32) -> Result<(), Error> where
T: ByteOrder, Writes an unsigned 32 bit integer to the underlying writer. Read more
fn write_i32<T>(&mut self, n: i32) -> Result<(), Error> where
T: ByteOrder, [src]
fn write_i32<T>(&mut self, n: i32) -> Result<(), Error> where
T: ByteOrder, Writes a signed 32 bit integer to the underlying writer. Read more
fn write_u48<T>(&mut self, n: u64) -> Result<(), Error> where
T: ByteOrder, [src]
fn write_u48<T>(&mut self, n: u64) -> Result<(), Error> where
T: ByteOrder, Writes an unsigned 48 bit integer to the underlying writer. Read more
fn write_i48<T>(&mut self, n: i64) -> Result<(), Error> where
T: ByteOrder, [src]
fn write_i48<T>(&mut self, n: i64) -> Result<(), Error> where
T: ByteOrder, Writes a signed 48 bit integer to the underlying writer. Read more
fn write_u64<T>(&mut self, n: u64) -> Result<(), Error> where
T: ByteOrder, [src]
fn write_u64<T>(&mut self, n: u64) -> Result<(), Error> where
T: ByteOrder, Writes an unsigned 64 bit integer to the underlying writer. Read more
fn write_i64<T>(&mut self, n: i64) -> Result<(), Error> where
T: ByteOrder, [src]
fn write_i64<T>(&mut self, n: i64) -> Result<(), Error> where
T: ByteOrder, Writes a signed 64 bit integer to the underlying writer. Read more
fn write_uint<T>(&mut self, n: u64, nbytes: usize) -> Result<(), Error> where
T: ByteOrder, [src]
fn write_uint<T>(&mut self, n: u64, nbytes: usize) -> Result<(), Error> where
T: ByteOrder, Writes an unsigned n-bytes integer to the underlying writer. Read more
fn write_int<T>(&mut self, n: i64, nbytes: usize) -> Result<(), Error> where
T: ByteOrder, [src]
fn write_int<T>(&mut self, n: i64, nbytes: usize) -> Result<(), Error> where
T: ByteOrder, Writes a signed n-bytes integer to the underlying writer. Read more
fn write_f32<T>(&mut self, n: f32) -> Result<(), Error> where
T: ByteOrder, [src]
fn write_f32<T>(&mut self, n: f32) -> Result<(), Error> where
T: ByteOrder, Writes a IEEE754 single-precision (4 bytes) floating point number to the underlying writer. Read more
fn write_f64<T>(&mut self, n: f64) -> Result<(), Error> where
T: ByteOrder, [src]
fn write_f64<T>(&mut self, n: f64) -> Result<(), Error> where
T: ByteOrder, Writes a IEEE754 double-precision (8 bytes) floating point number to the underlying writer. Read more
impl<T> Typeable for T where
T: Any, [src]
impl<T> Typeable for T where
T: Any,