[−]Struct openssl::pkcs7::Pkcs7Flags
Methods
impl Pkcs7Flags
impl Pkcs7Flags
pub const TEXT: Pkcs7Flags
pub const NOCERTS: Pkcs7Flags
pub const NOSIGS: Pkcs7Flags
pub const NOCHAIN: Pkcs7Flags
pub const NOINTERN: Pkcs7Flags
pub const NOVERIFY: Pkcs7Flags
pub const DETACHED: Pkcs7Flags
pub const BINARY: Pkcs7Flags
pub const NOATTR: Pkcs7Flags
pub const NOSMIMECAP: Pkcs7Flags
pub const NOOLDMIMETYPE: Pkcs7Flags
pub const CRLFEOL: Pkcs7Flags
pub const STREAM: Pkcs7Flags
pub const NOCRL: Pkcs7Flags
pub const PARTIAL: Pkcs7Flags
pub const REUSE_DIGEST: Pkcs7Flags
pub fn empty() -> Pkcs7Flags
pub fn empty() -> Pkcs7Flags
Returns an empty set of flags.
pub fn all() -> Pkcs7Flags
pub fn all() -> Pkcs7Flags
Returns the set containing all flags.
pub fn bits(&self) -> c_int
pub fn bits(&self) -> c_int
Returns the raw value of the flags currently stored.
pub fn from_bits(bits: c_int) -> Option<Pkcs7Flags>
pub fn from_bits(bits: c_int) -> Option<Pkcs7Flags>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
pub fn from_bits_truncate(bits: c_int) -> Pkcs7Flags
pub fn from_bits_truncate(bits: c_int) -> Pkcs7Flags
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
pub fn is_empty(&self) -> bool
pub fn is_empty(&self) -> bool
Returns true
if no flags are currently stored.
pub fn is_all(&self) -> bool
pub fn is_all(&self) -> bool
Returns true
if all flags are currently set.
pub fn intersects(&self, other: Pkcs7Flags) -> bool
pub fn intersects(&self, other: Pkcs7Flags) -> bool
Returns true
if there are flags common to both self
and other
.
pub fn contains(&self, other: Pkcs7Flags) -> bool
pub fn contains(&self, other: Pkcs7Flags) -> bool
Returns true
all of the flags in other
are contained within self
.
pub fn insert(&mut self, other: Pkcs7Flags)
pub fn insert(&mut self, other: Pkcs7Flags)
Inserts the specified flags in-place.
pub fn remove(&mut self, other: Pkcs7Flags)
pub fn remove(&mut self, other: Pkcs7Flags)
Removes the specified flags in-place.
pub fn toggle(&mut self, other: Pkcs7Flags)
pub fn toggle(&mut self, other: Pkcs7Flags)
Toggles the specified flags in-place.
pub fn set(&mut self, other: Pkcs7Flags, value: bool)
pub fn set(&mut self, other: Pkcs7Flags, value: bool)
Inserts or removes the specified flags depending on the passed value.
Trait Implementations
impl PartialOrd<Pkcs7Flags> for Pkcs7Flags
impl PartialOrd<Pkcs7Flags> for Pkcs7Flags
fn partial_cmp(&self, other: &Pkcs7Flags) -> Option<Ordering>
fn partial_cmp(&self, other: &Pkcs7Flags) -> Option<Ordering>
This method returns an ordering between self
and other
values if one exists. Read more
fn lt(&self, other: &Pkcs7Flags) -> bool
fn lt(&self, other: &Pkcs7Flags) -> bool
This method tests less than (for self
and other
) and is used by the <
operator. Read more
fn le(&self, other: &Pkcs7Flags) -> bool
fn le(&self, other: &Pkcs7Flags) -> bool
This method tests less than or equal to (for self
and other
) and is used by the <=
operator. Read more
fn gt(&self, other: &Pkcs7Flags) -> bool
fn gt(&self, other: &Pkcs7Flags) -> bool
This method tests greater than (for self
and other
) and is used by the >
operator. Read more
fn ge(&self, other: &Pkcs7Flags) -> bool
fn ge(&self, other: &Pkcs7Flags) -> bool
This method tests greater than or equal to (for self
and other
) and is used by the >=
operator. Read more
impl Ord for Pkcs7Flags
impl Ord for Pkcs7Flags
fn cmp(&self, other: &Pkcs7Flags) -> Ordering
fn cmp(&self, other: &Pkcs7Flags) -> Ordering
This method returns an Ordering
between self
and other
. Read more
fn max(self, other: Self) -> Self
1.21.0[src]
fn max(self, other: Self) -> Self
Compares and returns the maximum of two values. Read more
fn min(self, other: Self) -> Self
1.21.0[src]
fn min(self, other: Self) -> Self
Compares and returns the minimum of two values. Read more
impl PartialEq<Pkcs7Flags> for Pkcs7Flags
impl PartialEq<Pkcs7Flags> for Pkcs7Flags
fn eq(&self, other: &Pkcs7Flags) -> bool
fn eq(&self, other: &Pkcs7Flags) -> bool
This method tests for self
and other
values to be equal, and is used by ==
. Read more
fn ne(&self, other: &Pkcs7Flags) -> bool
fn ne(&self, other: &Pkcs7Flags) -> bool
This method tests for !=
.
impl Clone for Pkcs7Flags
impl Clone for Pkcs7Flags
fn clone(&self) -> Pkcs7Flags
fn clone(&self) -> Pkcs7Flags
Returns a copy of the value. Read more
fn clone_from(&mut self, source: &Self)
1.0.0[src]
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
impl Extend<Pkcs7Flags> for Pkcs7Flags
impl Extend<Pkcs7Flags> for Pkcs7Flags
fn extend<T: IntoIterator<Item = Pkcs7Flags>>(&mut self, iterator: T)
fn extend<T: IntoIterator<Item = Pkcs7Flags>>(&mut self, iterator: T)
Extends a collection with the contents of an iterator. Read more
impl Copy for Pkcs7Flags
impl Copy for Pkcs7Flags
impl Eq for Pkcs7Flags
impl Eq for Pkcs7Flags
impl Hash for Pkcs7Flags
impl Hash for Pkcs7Flags
fn hash<__H: Hasher>(&self, state: &mut __H)
fn hash<__H: Hasher>(&self, state: &mut __H)
Feeds this value into the given [Hasher
]. Read more
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,
1.3.0[src]
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,
Feeds a slice of this type into the given [Hasher
]. Read more
impl Sub<Pkcs7Flags> for Pkcs7Flags
impl Sub<Pkcs7Flags> for Pkcs7Flags
type Output = Pkcs7Flags
The resulting type after applying the -
operator.
fn sub(self, other: Pkcs7Flags) -> Pkcs7Flags
fn sub(self, other: Pkcs7Flags) -> Pkcs7Flags
Returns the set difference of the two sets of flags.
impl SubAssign<Pkcs7Flags> for Pkcs7Flags
impl SubAssign<Pkcs7Flags> for Pkcs7Flags
fn sub_assign(&mut self, other: Pkcs7Flags)
fn sub_assign(&mut self, other: Pkcs7Flags)
Disables all flags enabled in the set.
impl Not for Pkcs7Flags
impl Not for Pkcs7Flags
type Output = Pkcs7Flags
The resulting type after applying the !
operator.
fn not(self) -> Pkcs7Flags
fn not(self) -> Pkcs7Flags
Returns the complement of this set of flags.
impl BitAnd<Pkcs7Flags> for Pkcs7Flags
impl BitAnd<Pkcs7Flags> for Pkcs7Flags
type Output = Pkcs7Flags
The resulting type after applying the &
operator.
fn bitand(self, other: Pkcs7Flags) -> Pkcs7Flags
fn bitand(self, other: Pkcs7Flags) -> Pkcs7Flags
Returns the intersection between the two sets of flags.
impl BitOr<Pkcs7Flags> for Pkcs7Flags
impl BitOr<Pkcs7Flags> for Pkcs7Flags
type Output = Pkcs7Flags
The resulting type after applying the |
operator.
fn bitor(self, other: Pkcs7Flags) -> Pkcs7Flags
fn bitor(self, other: Pkcs7Flags) -> Pkcs7Flags
Returns the union of the two sets of flags.
impl BitXor<Pkcs7Flags> for Pkcs7Flags
impl BitXor<Pkcs7Flags> for Pkcs7Flags
type Output = Pkcs7Flags
The resulting type after applying the ^
operator.
fn bitxor(self, other: Pkcs7Flags) -> Pkcs7Flags
fn bitxor(self, other: Pkcs7Flags) -> Pkcs7Flags
Returns the left flags, but with all the right flags toggled.
impl BitAndAssign<Pkcs7Flags> for Pkcs7Flags
impl BitAndAssign<Pkcs7Flags> for Pkcs7Flags
fn bitand_assign(&mut self, other: Pkcs7Flags)
fn bitand_assign(&mut self, other: Pkcs7Flags)
Disables all flags disabled in the set.
impl BitOrAssign<Pkcs7Flags> for Pkcs7Flags
impl BitOrAssign<Pkcs7Flags> for Pkcs7Flags
fn bitor_assign(&mut self, other: Pkcs7Flags)
fn bitor_assign(&mut self, other: Pkcs7Flags)
Adds the set of flags.
impl BitXorAssign<Pkcs7Flags> for Pkcs7Flags
impl BitXorAssign<Pkcs7Flags> for Pkcs7Flags
fn bitxor_assign(&mut self, other: Pkcs7Flags)
fn bitxor_assign(&mut self, other: Pkcs7Flags)
Toggles the set of flags.
impl FromIterator<Pkcs7Flags> for Pkcs7Flags
impl FromIterator<Pkcs7Flags> for Pkcs7Flags
fn from_iter<T: IntoIterator<Item = Pkcs7Flags>>(iterator: T) -> Pkcs7Flags
fn from_iter<T: IntoIterator<Item = Pkcs7Flags>>(iterator: T) -> Pkcs7Flags
Creates a value from an iterator. Read more
impl Debug for Pkcs7Flags
impl Debug for Pkcs7Flags
impl Octal for Pkcs7Flags
impl Octal for Pkcs7Flags
impl Binary for Pkcs7Flags
impl Binary for Pkcs7Flags
impl LowerHex for Pkcs7Flags
impl LowerHex for Pkcs7Flags
impl UpperHex for Pkcs7Flags
impl UpperHex for Pkcs7Flags
Auto Trait Implementations
impl Send for Pkcs7Flags
impl Send for Pkcs7Flags
impl Sync for Pkcs7Flags
impl Sync for Pkcs7Flags
Blanket Implementations
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> ToOwned for T where
T: Clone,
[src]
impl<T> ToOwned for T where
T: Clone,
type Owned = T
fn to_owned(&self) -> T
[src]
fn to_owned(&self) -> T
Creates owned data from borrowed data, usually by cloning. Read more
fn clone_into(&self, target: &mut T)
[src]
fn clone_into(&self, target: &mut T)
🔬 This is a nightly-only experimental API. (toowned_clone_into
)
recently added
Uses borrowed data to replace owned data, usually by cloning. Read more
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
try_from
)Performs the conversion.
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
try_from
)Performs the conversion.
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId
[src]
fn get_type_id(&self) -> TypeId
🔬 This is a nightly-only experimental API. (get_type_id
)
this method will likely be replaced by an associated static
Gets the TypeId
of self
. Read more