[−][src]Struct rand::prng::hc128::Hc128Rng
A cryptographically secure random number generator that uses the HC-128 algorithm.
HC-128 is a stream cipher designed by Hongjun Wu1, that we use as an RNG. It is selected as one of the "stream ciphers suitable for widespread adoption" by eSTREAM2.
HC-128 is an array based RNG. In this it is similar to RC-4 and ISAAC before it, but those have never been proven cryptographically secure (or have even been significantly compromised, as in the case of RC-43).
Because HC-128 works with simple indexing into a large array and with a few operations that parallelize well, it has very good performance. The size of the array it needs, 4kb, can however be a disadvantage.
This implementation is not based on the version of HC-128 submitted to the eSTREAM contest, but on a later version by the author with a few small improvements from December 15, 20094.
HC-128 has no known weaknesses that are easier to exploit than doing a brute-force search of 2128. A very comprehensive analysis of the current state of known attacks / weaknesses of HC-128 is given in Some Results On Analysis And Implementation Of HC-128 Stream Cipher5.
The average cycle length is expected to be 21024*32+10-1 = 232777. We support seeding with a 256-bit array, which matches the 128-bit key concatenated with a 128-bit IV from the stream cipher.
This implementation uses an output buffer of sixteen u32
words, and uses
BlockRng
to implement the RngCore
methods.
References
-
Hongjun Wu (2008). "The Stream Cipher HC-128". The eSTREAM Finalists, LNCS 4986, pp. 39–47, Springer-Verlag. ↩
-
Internet Engineering Task Force (February 2015), "Prohibiting RC4 Cipher Suites". ↩
-
Hongjun Wu, Stream Ciphers HC-128 and HC-256 ↩
-
Shashwat Raizada (January 2015),"Some Results On Analysis And Implementation Of HC-128 Stream Cipher". ↩
Trait Implementations
impl Clone for Hc128Rng
[src]
impl Clone for Hc128Rng
fn clone(&self) -> Hc128Rng
[src]
fn clone(&self) -> Hc128Rng
Returns a copy of the value. Read more
fn clone_from(&mut self, source: &Self)
1.0.0[src]
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
impl Debug for Hc128Rng
[src]
impl Debug for Hc128Rng
fn fmt(&self, f: &mut Formatter) -> Result
[src]
fn fmt(&self, f: &mut Formatter) -> Result
Formats the value using the given formatter. Read more
impl SeedableRng for Hc128Rng
[src]
impl SeedableRng for Hc128Rng
type Seed = <Hc128Core as SeedableRng>::Seed
Seed type, which is restricted to types mutably-dereferencable as u8
arrays (we recommend [u8; N]
for some N
). Read more
fn from_seed(seed: Self::Seed) -> Self
[src]
fn from_seed(seed: Self::Seed) -> Self
Create a new PRNG using the given seed. Read more
fn from_rng<R: RngCore>(rng: R) -> Result<Self, Error>
[src]
fn from_rng<R: RngCore>(rng: R) -> Result<Self, Error>
Create a new PRNG seeded from another Rng
. Read more
fn seed_from_u64(state: u64) -> Self
[src]
fn seed_from_u64(state: u64) -> Self
Create a new PRNG using a u64
seed. Read more
impl RngCore for Hc128Rng
[src]
impl RngCore for Hc128Rng
fn next_u32(&mut self) -> u32
[src]
fn next_u32(&mut self) -> u32
Return the next random u32
. Read more
fn next_u64(&mut self) -> u64
[src]
fn next_u64(&mut self) -> u64
Return the next random u64
. Read more
fn fill_bytes(&mut self, dest: &mut [u8])
[src]
fn fill_bytes(&mut self, dest: &mut [u8])
Fill dest
with random data. Read more
fn try_fill_bytes(&mut self, dest: &mut [u8]) -> Result<(), Error>
[src]
fn try_fill_bytes(&mut self, dest: &mut [u8]) -> Result<(), Error>
Fill dest
entirely with random data. Read more
impl CryptoRng for Hc128Rng
[src]
impl CryptoRng for Hc128Rng
Auto Trait Implementations
Blanket Implementations
impl<R> Rng for R where
R: RngCore + ?Sized,
[src]
impl<R> Rng for R where
R: RngCore + ?Sized,
fn gen<T>(&mut self) -> T where
Standard: Distribution<T>,
[src]
fn gen<T>(&mut self) -> T where
Standard: Distribution<T>,
Return a random value supporting the [Standard
] distribution. Read more
fn gen_range<T: PartialOrd + SampleUniform>(&mut self, low: T, high: T) -> T
[src]
fn gen_range<T: PartialOrd + SampleUniform>(&mut self, low: T, high: T) -> T
Generate a random value in the range [low
, high
), i.e. inclusive of low
and exclusive of high
. Read more
fn sample<T, D: Distribution<T>>(&mut self, distr: D) -> T
[src]
fn sample<T, D: Distribution<T>>(&mut self, distr: D) -> T
Sample a new value, using the given distribution. Read more
ⓘImportant traits for DistIter<'a, D, R, T>fn sample_iter<'a, T, D: Distribution<T>>(
&'a mut self,
distr: &'a D
) -> DistIter<'a, D, Self, T> where
Self: Sized,
[src]
fn sample_iter<'a, T, D: Distribution<T>>(
&'a mut self,
distr: &'a D
) -> DistIter<'a, D, Self, T> where
Self: Sized,
Create an iterator that generates values using the given distribution. Read more
fn fill<T: AsByteSliceMut + ?Sized>(&mut self, dest: &mut T)
[src]
fn fill<T: AsByteSliceMut + ?Sized>(&mut self, dest: &mut T)
Fill dest
entirely with random bytes (uniform value distribution), where dest
is any type supporting [AsByteSliceMut
], namely slices and arrays over primitive integer types (i8
, i16
, u32
, etc.). Read more
fn try_fill<T: AsByteSliceMut + ?Sized>(
&mut self,
dest: &mut T
) -> Result<(), Error>
[src]
fn try_fill<T: AsByteSliceMut + ?Sized>(
&mut self,
dest: &mut T
) -> Result<(), Error>
Fill dest
entirely with random bytes (uniform value distribution), where dest
is any type supporting [AsByteSliceMut
], namely slices and arrays over primitive integer types (i8
, i16
, u32
, etc.). Read more
fn gen_bool(&mut self, p: f64) -> bool
[src]
fn gen_bool(&mut self, p: f64) -> bool
Return a bool with a probability p
of being true. Read more
fn choose<'a, T>(&mut self, values: &'a [T]) -> Option<&'a T>
[src]
fn choose<'a, T>(&mut self, values: &'a [T]) -> Option<&'a T>
Return a random element from values
. Read more
fn choose_mut<'a, T>(&mut self, values: &'a mut [T]) -> Option<&'a mut T>
[src]
fn choose_mut<'a, T>(&mut self, values: &'a mut [T]) -> Option<&'a mut T>
Return a mutable pointer to a random element from values
. Read more
fn shuffle<T>(&mut self, values: &mut [T])
[src]
fn shuffle<T>(&mut self, values: &mut [T])
Shuffle a mutable slice in place. Read more
ⓘImportant traits for Generator<T, R>fn gen_iter<T>(&mut self) -> Generator<T, &mut Self> where
Standard: Distribution<T>,
[src]
fn gen_iter<T>(&mut self) -> Generator<T, &mut Self> where
Standard: Distribution<T>,
: use Rng::sample_iter(&Standard) instead
Return an iterator that will yield an infinite number of randomly generated items. Read more
fn gen_weighted_bool(&mut self, n: u32) -> bool
[src]
fn gen_weighted_bool(&mut self, n: u32) -> bool
: use gen_bool instead
Return a bool with a 1 in n chance of true Read more
ⓘImportant traits for AsciiGenerator<R>fn gen_ascii_chars(&mut self) -> AsciiGenerator<&mut Self>
[src]
fn gen_ascii_chars(&mut self) -> AsciiGenerator<&mut Self>
: use sample_iter(&Alphanumeric) instead
Return an iterator of random characters from the set A-Z,a-z,0-9. Read more
impl<R> FromEntropy for R where
R: SeedableRng,
[src]
impl<R> FromEntropy for R where
R: SeedableRng,
fn from_entropy() -> R
[src]
fn from_entropy() -> R
Creates a new instance, automatically seeded with fresh entropy. Read more
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> ToOwned for T where
T: Clone,
[src]
impl<T> ToOwned for T where
T: Clone,
type Owned = T
fn to_owned(&self) -> T
[src]
fn to_owned(&self) -> T
Creates owned data from borrowed data, usually by cloning. Read more
fn clone_into(&self, target: &mut T)
[src]
fn clone_into(&self, target: &mut T)
🔬 This is a nightly-only experimental API. (toowned_clone_into
)
recently added
Uses borrowed data to replace owned data, usually by cloning. Read more
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
try_from
)Performs the conversion.
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
try_from
)Performs the conversion.
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId
[src]
fn get_type_id(&self) -> TypeId
🔬 This is a nightly-only experimental API. (get_type_id
)
this method will likely be replaced by an associated static
Gets the TypeId
of self
. Read more